Number of views:
Adjusting the horn
Number of views:
Product serial number
Machine Tool Pad Iron Series
Adjusting the use of the horn: It is mainly used for various machine tools and mechanical equipment. It is used to support the mechanical weight of the machine tool and adjust the balance of mechanical equipment. The installation of the machine tool does not require the anchor bolts to be fixed to the ground. The good vertical deflection makes the machine tool stable on the ground. This product can save installation costs and shorten the installation cycle.
How to adjust the horn: Place the adjusting horns under the force points of the machine, and apply force to each horn, then adjust the horn. Adjustable height is 3mm--15mm. The cast iron adjustment horn is easy to adjust and has a flexible migration. It is a major reform of the machine tool installation process without the need to bury the anchor screws and not damage the ground. It can improve the dynamic characteristics of the same bed, improve the machining accuracy of the machine, and has the functions of shockproof and noise reduction. Labor saving, time saving, material saving, and comprehensive economic benefits. For the design department, the contradiction caused by the difficulty in selecting equipment and the ground foundation cannot be determined. Wide versatility, suitable for installation of various types of machine tools and equipment.
1. The weight of the machine tool and the number of fastening holes of the machine base;
2. The load value of each horn = the total weight of the machine except the number of fastening holes; (in case of conditions, consider the position of the center of gravity of the machine tool to determine the weight distribution)
3. Find the result according to the type of machine used;
4. Check whether the diameter and length of the machine base hole and bolt are consistent.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table