PRODUCT

All categories



Number of views:

1007

Flat adjustment foot

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1007

Product serial number

Category

product

Quantity

-

+

Stock:

0



1

Product description

The flat adjustment feet are made according to JB/T3411. 58-99 standard, used to test the support of parts. The products are divided into steel parts and cast iron parts, and the outer surface is chrome-plated and painted.

The utility model has the advantages of simple structure and high load capacity, can effectively prevent or reduce the vibration of the machine tool, and can be widely used as a shock absorbing device for various machine tools.

The use of the flat adjustment foot: mainly adjust the flat plate, use it with the flat bracket, adjust the level of the flat plate, put the required machine mattress iron under the hole of the machine tool, insert the bolt, and screw it into contact with the load-bearing plate. Then, adjust the machine level (the bolt rotates clockwise, the machine rises): After adjusting the machine level, tighten the nut to fix the horizontal state. Because of the creep phenomenon in the rubber, when the horn is used twice, the machine tool horizontal iron is adjusted two weeks later. It is a shock-absorbing device installed on the foot of the machine tool, from the inner support, the rubber mat and the outer seat. , adjustment plate and screw composition. The load of the machine tool is transmitted to the rubber pad through the adjusting plate and the inner support, which can effectively dampen the longitudinal vibration of the machine tool; the adjustment plate can adjust the lifting and lowering of the machine tool and significantly improve the load capacity of the horn; the outer seat passes the riser screw and the concrete floor Fixed, can effectively reduce the lateral vibration of machine tools.