PRODUCT

All categories



Number of views:

1004

Strip rail

After the strip-shaped rail is installed, the horizontal deviation is not more than 1mm, the total length is not more than 2mm, the horizontal deviation of the corresponding point in the middle of the track is not more than 1mm, and the parallelism between each two strip-shaped rails The deviation is less than 2mm.

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1004

Product serial number

Category

Ground track series

Quantity

-

+

Stock:

0



1

Product description

The installation method of the strip-shaped rails is fixed on the inner sides of the strip-shaped rails with the M8 iron expansion nails or nails at the required spacing (about 500-700 mm). The bottom surface of the rails of the strip-shaped rails must be closely spaced with the ground, and there must be no virtual span clearance to prevent the strip-shaped rails from being bent and deformed after being loaded.

The installation points of the strip-shaped rail: use a horizontal bridge, a horizontal level instrument such as a level. Firstly, a strip-shaped ground rail is leveled, and then the strip-shaped ground rail is firstly adjusted downward according to the flattened strip-shaped ground rail, and is spliced into a cast beam platform. Then the cement is grouted, and after the cement slurry is solidified, the fine adjustment test of the cast iron strip platform is carried out.

The depth of the strip ground rail should be equal to or slightly higher than 3-5mm.

Specification model (length × width × height)			(Unit: mm)
1500×150×150	1500×200×150	1500×250×300	1500×300×400
2000×200×300	2000×250×300	2000×300×350	2000×350×350
2500×200×300	2500×250×300	2500×300×350	2500×300×400
2750×200×300	2750×250×300	2750×300×350	2750×300×400
3000×300×300	3000×300×350	3000×300×400	3000×320×400
3200×300×300	3200×300×350	3200×300×400	3200×320×400
3500×300×300	3500×300×350	3500×300×400	3500×320×400
4000×300×300	4000×300×350	3500×300×400	4000×320×400
4500×300×350	4500×300×400	4500×320×400	4500×350×400
5000×300×400	5000×350×400	5000×400×450

After the strip-shaped rail is installed, the horizontal deviation is not more than 1mm, the total length is not more than 2mm, the horizontal deviation of the corresponding point in the middle of the track is not more than 1mm, and the parallelism between each two strip-shaped rails The deviation is less than 2mm.

Scan the QR code to read on your phone