PRODUCT

All categories



Number of views:

1004

T-slot iron

T-slot iron material: high-strength cast iron HT200-300, working surface hardness is HB170-240. After two manual treatments (artificial annealing 600-700 degrees and natural aging), the precision of the product is stable and the wear resistance is good. .

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1004

Product serial number

Category

Ground track series

Quantity

-

+

Stock:

0



1

Product description

The main purpose of T-slot iron: design and splicing into a cast beam platform according to the fixed point of the equipment, mainly used for assembly, testing, welding and inspection of large equipment.

The advantage of the T-shaped trough iron: this does not need to be made into a large cast iron platform, which saves the material cost and can occupy a small space, which can be said to be very cost-effective.

T-slot iron material: high-strength cast iron HT200-300, working surface hardness is HB170-240. After two manual treatments (artificial annealing 600-700 degrees and natural aging), the precision of the product is stable and the wear resistance is good. .

Technical requirements for T-slot iron laying: The fixing method of the base trough iron is fixed on the inner side of the rail at the required spacing (about 500-700 mm) with M8 iron expansion nails or nails. The bottom surface of the track and the ground must be tightly pressed, and there must be no virtual span clearance to prevent the rail track from being bent and deformed.

Installation of T-slot iron: use a strip bridge, the image level. First level the ground rail, and then use it as a benchmark to make the initial adjustments. Then the cement is grouted, and after the cement slurry is solidified, a fine adjustment test is performed.

Scan the QR code to read on your phone