Number of views:
Three-layer anti-vibration horn
Number of views:
Product serial number
Machine Tool Pad Iron Series
Three-layer anti-vibration horn: The damping rubber effectively attenuates the vibration of the machine itself, reduces the vibration force transmission, prevents the transmission of vibration force, and ensures the dimensional accuracy and quality of the machining. Control the building structure resonance propagation vibration force and noise. Make coarse and fine processing all kinds of machine tools into production units to adapt to the development of logistics technology.
The machine tool installation does not need to set anchor bolts to the ground, good vibration reduction and considerable vertical deflection, so that the machine is stable on the ground. Save installation costs and shorten installation cycle. The position of the machine can be changed at any time according to the production, eliminating the cost of secondary installation and making the installation of the machine upstairs possible. The machine level can be adjusted, and the adjustment range is large, convenient and fast. The damping pad is made of nitrile synthetic rubber, resistant to grease and coolant.
Three-layer anti-vibration horns are applicable to metal processing machines, forging machines, textile machinery, printing machinery, food processing machinery, rubber machinery, wire manufacturing machinery, cable machinery, packaging machinery, generators and heavy equipment.
How to use the three-layer anti-vibration horn: Put the required horn into the hole of the machine tool, insert the bolt, screw it into contact with the load-bearing plate, and then adjust the machine level (the bolt rotates clockwise, the machine tool rises); After adjusting the machine level, tighten the nut to fix the horizontal state. Because of the creep phenomenon of the rubber, when the horn is used twice, the machine level is adjusted after two weeks.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table