PRODUCT

All categories



Number of views:

1018

V frame

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1018

Product serial number

Category

product

Quantity

-

+

Stock:

0



1

Product description

The V-frame is used for shaft inspection, calibration, and scribing. It can also be used to verify the verticality and parallelism of the workpiece.

V-frames are manufactured in accordance with the GB4972-85 standard and are generally supplied in pairs. They are a quadrangular body, four working faces or four 90-degree grooves of different sizes. Mainly used for inspection and scribing of shaft parts.

The V-shaped frame is mainly used to place circular workpieces such as shafts, sleeves and discs in order to find the center line and draw the center line. Generally, the V-frames are a pair of two pieces, and the two planes and the V-shaped grooves are all ground in one installation. The precision of the V-frame is parallel to each other. The verticality error is within 0.01 mm. The center line of the V-groove must be in the symmetry plane of the V-frame and parallel to the bottom surface. Concentricity and parallelism errors are also Within 0.01 mm, the V-groove half-angle error is within the range of ±30~±1. The precision V-frame can also be scribed, with a V-frame that holds the yoke, which can hold the cylindrical workpiece firmly on the V-frame and flip it to each position.